VGS Issues and Guidelines

From T-VEC Wiki
Revision as of 10:36, 26 February 2007 by Admin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Test Vector Generation Failures

If test vector failures occur there are some general guidelines that apply to any type of model (TTM or Simulink):

  1. Check to make sure that the lower-level subsystems do not have failures, correct those failures first
  2. Check to make sure that the constraints of lower-level subsystem do not preclude satisfiability associated with higher-level subsystems that reference the lower-level subsystems
  3. Use the Auto Rotate Convergence Fix Mode in the Vector Generator Properties of VGS
  4. Ensure the range settings of inputs variables do not preclude satisfiability